IEI Technology PPC2-C-EHL Series User Manual Download Page 58

Page: 58 / 100

PPC2-Cxxx-EHL Series Panel PC

Page 44

Figure 3-26: Install into a Rack/Cabinet

Step 7:

Once the flat panel PC with the attached rack/cabinet bracket has been properly

inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to

the front of the rack or cabinet (

Figure 3

3.9.3

Arm Mounting

The PPC2-Cxxx-EHL Series is VESA (Video Electronics Standards Association)

compliant and can be mounted on an arm with a 75/100 mm interface pad. To mount the

PPC2-Cxxx-EHL Series on an arm, please follow the steps below.

Step 1:

The arm is a separately purchased item. Please correctly mount the arm onto

the surface it uses as a base. To do this, refer to the installation documentation

that came with the mounting arm.

NOTE:

When purchasing the arm please ensure that it is VESA compliant and

that the arm has a 75/100 mm interface pad. If the mounting arm is not

VESA compliant, it cannot be used to support the PPC2-Cxxx-EHL Series

panel PC.

Summary of Contents for PPC2-C-EHL Series





































































































Search results

Summary of Contents for PPC2-C-EHL Series

Reviews:

Related manuals for PPC2-C-EHL Series

Brands by name

Popular brands

IEI Technology PPC2-C-EHL Series, User Manual

Search results

Summary of Contents for PPC2-C-EHL Series

Reviews:

Related manuals for PPC2-C-EHL Series

Brands by name

Popular brands