IEI Technology PPC2-C-EHL Series, User Manual

Page: 43 / 100

PPC2-Cxxx-EHL Series Panel PC
Page 29
3.6 HDD Installation (Optional)
To install a 2.5” HDD into the PPC2-Cxxx-EHL Series (model of 12" or above), please
follow the steps below:
Step 1: Remove the back cover . See Section 3.5 .
Step 2: Remove the HDD bracket from the PPC2 - Cxxx - EHL Series . The HDD
bracket is secured on the panel PC with four retention screws ( Figure 3 - 2 ).
Remove the four retention screws and disconnect the SATA and SATA power
cables. Lift the bracket off the panel PC.
Figure 3-2: PPC2-Cxxx-EHL HDD Bracket Retention Screws
Step 3: Secure the hard drive to the bracket . Secure the hard drive to the bracket with
four retention screws ( Figure 3 - 3 : HDD Retention Screws).