IEI Technology PPC-F12B-BT User Manual Download Page 109

Page: 109 / 153

PPC-F12B/15B/17B/19B-BTi Panel PC

Page 93



Save Changes and Reset

Use the

Save Changes and Reset

option to save the changes made to the BIOS options

and reset the system.



Discard Changes and Reset

Use the

Discard Changes and Reset

option to exit the system without saving the

changes made to the BIOS configuration setup program.



Restore Defaults

Use the

Restore Defaults

option to load the optimal default values for each of the

parameters on the Setup menus.

F3 key can be used for this operation.



Save as User Defaults

Use the

Save as User Defaults

option to save the changes done so far as user defaults.



Restore User Defaults

Use the

Restore User Defaults

option to restore the user defaults to all the setup options.

Summary of Contents for PPC-F12B-BT


























































































































































Search results

Summary of Contents for PPC-F12B-BT

Reviews:

Related manuals for PPC-F12B-BT

Brands by name

Popular brands

IEI Technology PPC-F12B-BT, User Manual

Search results

Summary of Contents for PPC-F12B-BT

Reviews:

Related manuals for PPC-F12B-BT

Brands by name

Popular brands