IEI Technology PPC-51xxA-H61 User Manual Download

Page: 67 / 193

PPC-51xxA-H61 Panel PC

Page 52

Figure 3-32: SFP Fiber Module Installation

NOTE:

The pin locations of the SFP connector 2 are opposite to the SFP

connector 1. Please rotate the SFP module to a proper position to

install the SFP module into the SFP connector 2.

3.13 Bottom Panel Connectors

The bottom panel of the PPC-51xxA-H61 contains I/O connectors, switches and a CF card

slot. Detailed descriptions of the connectors can be found in the subsections below.

3.13.1 Audio Connectors

The audio jacks connect to external audio devices.

Mic-in (Pink):

Connects a microphone.

Line-out (Green):

Connects to a headphone or a speaker. With multi-channel

configurations, this port can also connect to front speakers.

Summary of Contents for PPC-51xxA-H61


































































































































































































Search results

Summary of Contents for PPC-51xxA-H61

Reviews:

Related manuals for PPC-51xxA-H61

Brands by name

Popular brands

IEI Technology PPC-51xxA-H61, User Manual

Search results

Summary of Contents for PPC-51xxA-H61

Reviews:

Related manuals for PPC-51xxA-H61

Brands by name

Popular brands