3
Battery Charging
To charge battery, follow the steps below:
Step 1:
Connect the supplied power adapter to the power connector on the rear of
the docking station.
Step 2:
Connect the supplied power cord to the power adapter. Plug the power cord
into any standard power outlet.
Step 3:
Turn on the docking station by using the power switch on the rear panel.
The power LED on the front panel lights up in orange.
Step 4:
Insert a battery into a battery bay as shown below. The LED indicator lights
on in red indicating the battery is being charged. The LED will turn to green when the
battery is fully charged.
-----------------------------------------------------------------------------------------------------------------
Warning!
–
Use only the power adapter approved for this device. Use of another type of
adapter may risk fire or explosion;
–
Do not apply voltage levels that exceed the specified voltage range. Doing so may
cause fire and/or an electrical shock. Use a power cord that matches the voltage of
the power outlet, which has been approved and complies with the safety standard of
your particular country.
-----------------------------------------------------------------------------------------------------------------
