IEI Technology POC 965 SERIES, User Manual

Page: 47 / 182

Page 31
POC 965 Series Medical Panel PC
4.7 Mounting the System
WARNING!
When mounting the flat panel PC onto an arm, onto the wall or onto a
panel, it is better to have more than one person to help with the installation
to make sure the panel PC does not fall down and get damaged.
The four methods of mounting the POC-965 Series are listed below.
Wall mounting
Arm mounting
Stand mounting
The four mounting methods are described below.
4.7.1 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four brackets screw holes on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 4-4
).