IEI Technology PM-945GSE-N270 User Manual Download Page 70

Page: 70 / 122

PM-945GSE-N270 User Manual

Page 70

WARNING:

If the USB pins are not properly aligned, the USB device can burn out.

Step 2:

Align the connectors

. The cable has two connectors. Correctly align pin 1on

each cable connector with pin 1 on the PM-945GSE-N270 USB connector.

Step 3:

Insert the cable connectors

. Once the cable connectors are properly aligned

with the USB connectors on the PM-945GSE-N270, connect the cable

connectors to the on-board connectors. See

Figure 4-14

Figure 4-14: Dual USB Cable Connection

Step 4:

Attach the USB connectors to the chassis

. The USB 2.0 connectors each of

two retention screw holes. To secure the connectors to the chassis please refer

to the installation instructions that came with the chassis.

Step 0:

4.8 Software Installation

All the drivers for the PM-945GSE-N270 are on the CD that came with the system. To

install the drivers, please follow the steps below.

Step 1:

Insert the CD into a CD drive connected to the system.

Summary of Contents for PM-945GSE-N270



























































































































Search results

Summary of Contents for PM-945GSE-N270

Reviews:

Brands by name

Popular brands

IEI Technology PM-945GSE-N270, User Manual

Search results

Summary of Contents for PM-945GSE-N270

Reviews:

Brands by name

Popular brands