IEI Technology PM-945GSE-N270 User Manual Download Page 103

Page: 103 / 122

PM-945GSE-N270 User Manual

Page 103

this field and enter the password. After the password has been added,

Install

appears

next to

Change Supervisor Password



Change User Password

Use the

Change User Password

to set or change a user password. The default for this

option is

Not Installed

. If a user password must be installed, select this field and enter the

password. After the password has been added,

Install

appears next to

Change User

Password



Clear User Password

Use the

Clear User Password

to clear a user’s password. The default for this option is

Not Installed

. If a user password must be cleared, use this option.



Boot Sector Virus Protection [Disabled]

Use the

Boot Sector Virus Protection

to enable or disable boot sector protection.



Disabled D

EFAULT

Disables the boot sector virus protection



Enabled

Enables the boot sector virus protection

5.7 Chipset

Use the

Chipset

menu (

BIOS Menu 19

) to access the Video configuration menu.

WARNING!

Setting the wrong values for the Chipset BIOS selections in the Chipset

BIOS menu may cause the system to malfunction.

Summary of Contents for PM-945GSE-N270



























































































































Search results

Summary of Contents for PM-945GSE-N270

Reviews:

Brands by name

Popular brands

IEI Technology PM-945GSE-N270, User Manual

Search results

Summary of Contents for PM-945GSE-N270

Reviews:

Brands by name

Popular brands