IEI Technology PICOe-PV-D510, User Manual

Page: 61 / 141

PICOe-PV-D510 User Manual
Page 49
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in Table 4-5 .
LCD Voltage Select Description
Short 1-2 +3.3V
Short 3-4 +5V Default
Short 5-6 +12V
Table 4-5: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 4-6 .
Figure 4-6: LVDS Voltage Selection Jumper Pinout Locations
4.5.5 PCIe Status Select
Jumper Label:
JP1
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-6
Jumper Location:
See Figure 4-7
The PCIe Status Select jumper allows the PCIe status to be configured. The PCIe Status
Select jumper settings are shown in Table 4-5 .