IEI Technology PEMUX-XEW1, User Manual

Page: 59 / 115

PEMUX-XEW1
Page 45
4.7.2 Load Default Button
To load system default, press the load default button (J_LOAD1). The load default button
location is shown below.
Figure 4-4: Load Default Button Location
4.7.3 Flash Descriptor Security Override Jumper
The flash descriptor security override jumper (J_FLASH1) allows to enable or disable the
ME firmware update. Refer to Table 4-1 and Figure 4-5 for the jumper location and
settings.
Setting Description
Short 1-2 Disabled (default)
Short 2-3 Enabled
Table 4-1: Flash Descriptor Security Override Jumper Settings
Figure 4-5: Flash Descriptor Security Override Jumper Location