manualshive.com logo in svg

IEI Technology PCISA-PV-D4251, User Manual

Share
Download
IEI Technology PCISA-PV-D4251 User Manual Download Page 117

 

 

PCISA-PV-D4251/N4551/D5251 CPU Card

Page 104 

 NOTE: 

Use the following commands to check if the partitions were created 

successfully. 

 

Step 6: 

Press any key to exit the recovery tool and automatically reboot the system. 

Please continue to the following procedure: Build-up Recovery Partition.

S

te

p

 0

:

 

C.2.3 Install Operating System, Drivers and Applications 

Install the operating system onto the unlabelled partition. The partition labeled as 

"Recovery" is for use by the system recovery tool and should not be used for installing the 

operating system or any applications. 

 NOTE: 

The operating system installation program may offer to reformat the 

chosen partition. DO NOT format the partition again. The partition has 

already been formatted and is ready for installing the new operating 

system. 

To install the operating system, insert the operating system installation CD into the optical 

drive. Restart the computer and follow the installation instructions. 

Summary of Contents for PCISA-PV-D4251


















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands