IEI Technology PCISA-9652 User Manual Download Page 94

Page: 94 / 232

PCISA-9652 Half-Size CPU Card

Page 74

5.1 Anti-static Precautions

WARNING:

Failure to take ESD precautions during the installation of the

PCISA-9652 may result in permanent damage to the PCISA-9652 and

severe injury to the user.

Electrostatic discharge (ESD) can cause serious damage to electronic components,

including the PCISA-9652. Dry climates are especially susceptible to ESD. It is therefore

critical that whenever the PCISA-9652, or any other electrical component is handled, the

following anti-static precautions are strictly adhered to.

Wear an anti-static wristband

: Wearing a simple anti-static wristband can

help to prevent ESD from damaging the board.

Self-grounding

: Before handling the board touch any grounded conducting

material. During the time the board is handled, frequently touch any

conducting materials that are connected to the ground.

Use an anti-static pad

: When configuring the PCISA-9652, place it on an

antic-static pad. This reduces the possibility of ESD damaging the

PCISA-9652.

Only handle the edges of the PCB

: When handling the PCB, hold the PCB

by the edges.

Summary of Contents for PCISA-9652









































































































































































































































Search results

Summary of Contents for PCISA-9652

Reviews:

Related manuals for PCISA-9652

Brands by name

Popular brands

IEI Technology PCISA-9652, User Manual

Search results

Summary of Contents for PCISA-9652

Reviews:

Related manuals for PCISA-9652

Brands by name

Popular brands