IEI Technology NOVA-PV-D4251 User Manual Download Page 172

Page: 172 / 194

NOVA-PV-D5251/D4251 5.25" SBC

Page 156

B.6 Restore Systems from a Linux Server through LAN

The One Key Recovery allows a client system to automatically restore to a factory default

image saved in a Linux system (the server) through LAN connectivity after encountering a

Blue Screen of Death (BSoD) or a hang for around 10 minutes. To be able to use this

function, the client system and the Linux system MUST reside in the same domain.

CAUTION:

The supported client OS includes:

Windows

2000

Windows

Windows XP Embedded

Windows

Vista

Windows Embedded Standard 7

Prior to restoring client systems from a Linux server, a few setup procedures are required.

Step 1:

Configure DHCP server settings

Step 2:

Configure TFTP settings

Step 3:

Configure One Key Recovery server settings

Step 4:

Start DHCP, TFTP and HTTP

Step 5:

Create a shared directory

Step 6:

Setup a client system for auto recovery

The detailed descriptions are described in the following sections. In this document, two

types of Linux OS are used as examples to explain the configuration process – CentOS

5.5 (Kernel 2.6.18) and Debian 5.0.7 (Kernel 2.6.26).

Summary of Contents for NOVA-PV-D4251



































































































































































































Search results

Summary of Contents for NOVA-PV-D4251

Reviews:

Related manuals for NOVA-PV-D4251

Brands by name

Popular brands

IEI Technology NOVA-PV-D4251, User Manual

Search results

Summary of Contents for NOVA-PV-D4251

Reviews:

Related manuals for NOVA-PV-D4251

Brands by name

Popular brands