IEI Technology NOVA-PV-D4251 User Manual Download Page 167

Page: 167 / 194

NOVA-PV-D5251/D4251 5.25" SBC

Page 151

Figure B-35: Recovery Tool Main Menu

The recovery tool has several functions including:

Factory Restore

: Restore the factory default image (iei.GHO) created in

Section B.2.5.

Backup system

: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

Restore your last backup

: Restore the last system backup image

Manual

: Enter the Symantec Ghost window to configure manually.

Quit

: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.

WARNING:

All data in the system will be deleted during the system recovery.

Please backup the system files before restoring the system (either

Factory Restore or Restore Backup).

Summary of Contents for NOVA-PV-D4251



































































































































































































Search results

Summary of Contents for NOVA-PV-D4251

Reviews:

Related manuals for NOVA-PV-D4251

Brands by name

Popular brands

IEI Technology NOVA-PV-D4251, User Manual

Search results

Summary of Contents for NOVA-PV-D4251

Reviews:

Related manuals for NOVA-PV-D4251

Brands by name

Popular brands