IEI Technology NANO-HM551 User Manual Download Page 88

Page: 88 / 162

NANO-HM551 EPIC SBC

Page 74



All USB Devices [Enabled]

Use the

All USB Devices

option to enable the USB devices.



Disabled

All USB devices are disabled.



Enabled D

EFAULT

All USB devices are enabled.



Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support. Normally if this option is not enabled, any attached USB mouse or USB keyboard

does not become available until a USB compatible operating system is fully booted with all

USB drivers loaded. When this option is enabled, any attached USB mouse or USB

keyboard can control the system even when there is no USB driver loaded onto the

system.



Disabled

Legacy USB support disabled



Enabled D

EFAULT

Legacy USB support enabled



Auto

Legacy USB support disabled if no USB devices are

connected

Summary of Contents for NANO-HM551



































































































































































Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands

IEI Technology NANO-HM551, User Manual

Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands