IEI Technology NANO-HM551 User Manual Download Page 21

Page: 21 / 162

NANO-HM551 EPIC SBC

Page 7

Specification

NANO-HM551

Serial Ports

Three RS-232 via four 10-pin headers

One TTL serial connector via 10-pin header

One RS-232/422/485 via 14–pin header

USB 2.0/1.1 Ports

Four external USB ports

Four internal USB ports via two 8-pin headers

Storage

Serial ATA

Two SATA 3.0 Gb/s connectors with RAID 0,1 support

Two 5V SATA power connectors

Environmental and Power Specifications

Power Supply

12 V only

ATX and AT power supported

Power Connector

One internal 4-pin Molex power connector for power supply

Power Consumption

[email protected] (2.13 GHz Intel® Core™ i3 330M CPU with one

1066 MHz 1 GB DDR3 SO-DIMM), [email protected],

[email protected], [email protected]

Operating Temperature

-10ºC ~ 60ºC (requires cooler and silicone heat sink paste)

Humidity

5% ~ 95% (non-condensing)

Physical Specifications

Dimensions

165 mm x 115 mm

Weight GW/NW

850 g / 350 g

Table 1-1: Technical Specifications

Summary of Contents for NANO-HM551



































































































































































Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands

IEI Technology NANO-HM551, User Manual

Search results

Summary of Contents for NANO-HM551

Reviews:

Related manuals for NANO-HM551

Brands by name

Popular brands