IEI Technology NANO-GM45A, User Manual, Page: 102 / 128

NANO-GM45A EPIC SBC
Page 90
ƒ
AddOn ROM Display Mode [Force BIOS]
Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory)
messages to be displayed.
Î
Force BIOS D
EFAULT
The system forces third party BIOS to display
during system boot.
Î
Keep Current
The system displays normal information during
system boot.
ƒ
Bootup Num-Lock [On]
Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be
modified during boot up.
Î
Off
Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.
Î
On D
EFAULT
Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
ƒ
RTL8111CP LAN Boot [Disabled]
Use the RTL8111CP LAN Boot option to enable the Realtek RTL8111CP PCIe GbE
controller to boot the system.
Î
Disabled D
EFAULT
Cannot be booted from a remote system through the
Realtek RTL8111CP PCIe GbE controller
Î
Enabled Can be booted from a remote system through the
Realtek RTL8111CP PCIe GbE controller