IEI Technology NANO-6613, User Manual, Page: 61 / 174

1 -61
NANO-6613 Motherboard
61
Jumper Location: See Figure 3-23
If the NANO-6613 fails to boot due to improper BIOS settings, use this jumper to clear the
CMOS data and reset the system BIOS information. To do this, use the jumper cap to
close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2.
If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault
may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the
following:
Enter the correct CMOS setting
Load Optimal Defaults
Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
Clear CMOS DESCRIPTION
Short 1-2 Normal Operation (Default)
Short 2-3 Clear CMOS Setup
Table 3-30: Clear CMOS Jumper Settings
The clear CMOS jumper is located in Figure 3-23 .