IEI Technology KINO-DQM871 User Manual Download

Page: 185 / 211

KINO-DQM871 Mini-ITX SBC

Page 170

Figure B-35: Recovery Tool Main Menu

The recovery tool has several functions including:

Factory Restore

: Restore the factory default image (iei.GHO) created in

Section B.2.5.

Backup system

: Create a system backup image (iei_user.GHO) which will be

saved in the hidden partition.

Restore your last backup

: Restore the last system backup image

Manual

: Enter the Symantec Ghost window to configure manually.

Quit

: Exit the recovery tool and restart the system.

WARNING:

Please do not turn off the system power during the process of system

recovery or backup.

WARNING:

All data in the system will be deleted during the system recovery.

Please backup the system files before restoring the system (either

Factory Restore or Restore Backup).

Summary of Contents for KINO-DQM871




















































































































































































































Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands

IEI Technology KINO-DQM871, User Manual

Search results

Summary of Contents for KINO-DQM871

Reviews:

Related manuals for KINO-DQM871

Brands by name

Popular brands