Quick
START
ECP5 Evaluation Board
This document provides a brief introduction to ECP5 Evaluation Board.
1
2
Check Kit Contents
The ECP5 Evaluation Board kit contains the following items
ECP5 Evaluation Board
12V AC/DC Adapter & International Plug Adapters
USB Cable for Programming via PC (USB-A to Mini-B)
Limited license with unique serial number for Lattice Diamond development software
(optional to use).
Quick Start Guide
Using the ECP5 Evaluation Board
The ECP5 Evaluation Board as shipped supports Master-SPI based configuration.
The external SPI Flash Configuration Memory is pre-loaded with a demonstration
program described below.
Mini USB
Programming
(J2)
JTAG
Interface (J1)
ECP5-5G
Device (U3)
GPIO
Headers
(J5, J8)
Prototype
Area
Microphone
Board/
GPIO Header
(J30)
PMOD/
GPIO
Header
(J31)
GPIO
Headers
(J32, J33)
12 V DC
Power
Input (J37)
Input Push
Buttons
(SW2, SW3,
SW4)
Output LEDs
(D5-D12)
CFG Switches
(SW1)
Input Switches
(SW5)
SPI Flash
Configuration
Memory (U4)
Versa
Expansion
Connectors
(J39, J40)
Parallel
Config
Header
(J38)
SERDES Test
SMA
Connectors
(J9-J26)
