IEI Technology KINO-DAL-E1W2, User Manual

Page: 71 / 151

KINO-DAL SBC
Page 57
4.4 M.2 Module Installation
CAUTION:
If an M.2 module is installed in the M.2 slot (M2_1), the SATA port 2
(SATA2) will be disabled. Choose either the SATA2 connector or the
M.2 module for storage.
To install an M.2 module, please follow the steps below.
Step 1: Locate the M.2 module slot. See Chapter 3 .
Step 2: Remove the on-board retention screw and the plastic ring as shown in
Figure 4-2 .
Figure 4-2: Removing the M.2 Module Retention Screw and Plastic Ring