IEI Technology KINO-AH611 User Manual Download

Page: 14 / 165

KINO-AH611

Page 2

1.1 Introduction

Figure 1-1: KINO-AH611

The KINO-AH611 is a Mini-ITX motherboard. It accepts an LGA1155 Intel® Core™

i7/i5/i3/Pentium®/Celeron® processor and supports two 204-pin 1066/1333

MHz

dual-channel DDR3 SO-DIMM modules up to 16 GB.

The integrated Intel® H61 System Chipset supports two GbE LAN ports through dual

Realtek RTL8111E PCIe GbE controllers (with ASF 2.0 support). The KINO-AH611 also

supports three SATA 3Gb/s drives.

The KINO-AH611 includes a dual VGA and dual HDMI port. Expansion and I/O include

one PCI x16 slot, one half-size PCIe Mini card slot, six USB 2.0 ports on the rear panel

and two USB 2.0 ports by pin header. Serial device connectivity is provided by two

external RS-232 connectors.

Summary of Contents for KINO-AH611






































































































































































Search results

Summary of Contents for KINO-AH611

Reviews:

Related manuals for KINO-AH611

Brands by name

Popular brands

IEI Technology KINO-AH611, User Manual

Search results

Summary of Contents for KINO-AH611

Reviews:

Related manuals for KINO-AH611

Brands by name

Popular brands