IEI Technology KINO-780AM2, User Manual

Page: 90 / 131

KINO-780AM2 Motherboard
Page 78
Î
COM2 System is remotely accessed through COM2
NOTE : Make sure the selected COM port is enabled through the Super I/O configuration
menu.
ƒ
Base Address, IRQ [3F8h,3]
The Base Address, IRQ option cannot be configured and only shows the interrupt
address of the serial port listed above.
ƒ
Serial Port Mode [115200 8,n,1]
Use the Serial Port Mode option to select baud rate through which the console redirection
is made. The following configuration options are available
ƒ
115200 8,n,1 D
EFAULT
ƒ
57600 8,n,1
ƒ
38400 8,n,1
ƒ
19200 8,n,1
ƒ
09600 8,n,1
NOTE:
Identical baud rate setting musts be set on the host (a management
computer running a terminal software) and the slave
ƒ
Redirection After BIOS POST [Always]
Use the Redirection After BIOS POST option to specify when console redirection should
occur.
Î
Disabled The console is not redirected after POST
Î
Boot Loader Redirection is active during POST and during Boot
Loader
Î
Always D
EFAULT
Redirection is always active (Some OSes may not
work if set to Always)