manualshive.com logo in svg

IEI Technology iSignager LCD 26, User Manual, Page: 33 / 73

Share
Download
IEI Technology iSignager LCD 26 User Manual Download Page 33

 

 

iSignager LCD Series 

Page 21 

 

Figure 2-5: IDE HDD Installation 

Step 7: 

Replace the aluminum cover and the plastic back cover. 

Step 0:

 

2.1.3 DVI/VGA Connection 

The iSignager LCD Series supports dual display via the DVI-I connector on the bottom 

panel. To connect the iSignager LCD Series to a second display device, follow the 

instructions below. 

Step 1: 

DVI:

 Connect the DVI cable to the DVI port on the bottom panel of the iSignager 

LCD Series. Connect the other side of the DVI cable to the second display 

device. 

VGA:

 Connect the DVI-I to VGA adapter to the DVI port on the bottom panel of 

the iSignager LCD Series. Connect the VGA cable to the iSignager LCD Series 

and the second display device. 

Step 2: 

Connect the audio cable to the audio output port on the bottom panel of the 

iSignager LCD Series. Connect the other side of the audio cable to the audio 

input port of the second display device.

 

Summary of Contents for iSignager LCD 26










































































Reviews:

No comments