IEI Technology iSignager LCD 26, User Manual, Page: 30 / 73

iSignager LCD Series
Page 18
2.1 Hardware Installation
2.1.1 iSignager LCD Series Set-Up
To set up the iSignager LCD Series (the player), follow the steps below:
Step 1: Connect audio and video input to the player (if available).
Step 2: To transfer player settings or sequences to the player via the network, connect
the iSignager LCD Series to the same LAN of the PC via an Ethernet cable
(optional step).
Step 3: Connect the player to the power supply. Step 0:
NOTE:
After the hardware installation, a formatted CF card/HDD with display
content and player settings generated by iSignager AdDesign has to be
installed in the iSignager LCD Series for broadcasting.
2.1.2 HDD Installation (Optional)
A hard drive disk (HDD) can be used as the storage device on the iSignager LCD Series
instead of the CF card. The HDD provides larger data storage capacity. Before installing
the HDD, please install the iSignager AdDesign first and design the layout and sequence
with the iSignager AdDesign (see iSignager AdDesign user manual). After designing the
display content in the iSignager AdDesign, follow the steps below to install IDE HDD.
Step 1: Format the HDD as FAT 32 format. Connect the HDD to a computer with an
IDE-USB cable ( Figure 2-1 ) and format the HDD.