manualshive.com logo in svg

IEI Technology IOVU-751R-CE5/UX-R10, User Manual

Share
Download
IEI Technology IOVU-751R-CE5/UX-R10 User Manual Download Page 43

 

 

IOVU-751R-CE5/UX-R10 User Manual 

Page 35

 

Figure 4-14: Tighten the Panel Mounting Clamp Screws

4.3.3 Arm Mounting 

The IOVU-751R-CE5/UX-R10 is VESA (Video Electronics Standards Association) 

compliant and can be mounted on an arm with a 75 mm interface pad. To mount the 

IOVU-751R-CE5/UX-R10 on an arm, please follow the steps below. 

Step 1:  The arm is a separately purchased item. Please correctly mount the arm onto 

the surface it uses as a base. To do this, refer to the installation documentation 

that came with the mounting arm. 

 

NOTE:

 

When purchasing the arm please ensure that it is VESA compliant and that 

the arm has a 75 mm interface pad. If the mounting arm is not VESA 

compliant it cannot be used to support the IOVU-751R-CE5/UX-R10. 

Step 2:  Once the mounting arm has been firmly attached to the surface, lift the 

IOVU-751R onto the interface pad of the mounting arm. 

Summary of Contents for IOVU-751R-CE5/UX-R10





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands