manualshive.com logo in svg

IEI Technology IOVU-751R-CE5/UX-R10, User Manual

Share
Download
IEI Technology IOVU-751R-CE5/UX-R10 User Manual Download Page 29

 

 

IOVU-751R-CE5/UX-R10 User Manual 

Page 21

4.1 Installation Precautions 

When installing the IOVU-751R-CE5/UX-R10, please follow the precautions listed below: 

ƒ

 

Read the user manual

: The user manual provides a complete description of 

the IOVU-751R-CE5/UX-R10, installation instructions and configuration 

options. 

ƒ

 

DANGER! Disconnect Power

: Power to the IOVU-751R-CE5/UX-R10 must 

be disconnected during the installation process, or before any attempt is 

made to access the rear panel. Electric shock and personal injury might occur 

if the rear panel of the IOVU-751R-CE5/UX-R10    is opened while the power 

cord is still connected to an electrical outlet. 

ƒ

 

Qualified Personnel

: The IOVU-751R-CE5/UX-R10 must be installed and 

operated only by trained and qualified personnel. Maintenance, upgrades, or 

repairs may only be carried out by qualified personnel who are familiar with 

the associated dangers. 

ƒ

 

Mounting

: It is advisable at least two people assist with mounting the 

IOVU-751R-CE5/UX-R10. 

ƒ

 

Air Circulation

: Make sure there is sufficient air circulation when installing 

the IOVU-751R-CE5/UX-R10. The IOVU-751R-CE5/UX-R10’s cooling vents 

must not be obstructed by any objects. Blocking the vents can cause 

overheating of the IOVU-751R-CE5/UX-R10. Leave at least 5 cm of 

clearance around the IOVU-751R-CE5/UX-R10 to prevent overheating. 

ƒ

 

Grounding

: The IOVU-751R-CE5/UX-R10 should be properly grounded. The 

voltage feeds must not be overloaded. Adjust the cabling and provide external 

overcharge protection per the electrical values indicated on the label attached 

to the back of the IOVU-751R-CE5/UX-R10. 

4.2 External Peripheral Interface Connectors 

Table 4-1

 lists the external interface connectors on the IOVU-751R-CE5/UX-R10. 

Detailed descriptions of the connectors can be found following the table. 

 

Summary of Contents for IOVU-751R-CE5/UX-R10





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands