IEI Technology IOVU-210AR-RK39, User Manual

Page: 26 / 57

IOVU-210AR-RK39 Panel PC
Page 18
3.4 Mounting the System
3.4.1 Wall Mounting
To mount the IOVU-210AR-RK39 onto a wall, please follow the steps below.
Step 1: Select a location on the wall for the wall-mounting bracket. Carefully mark the
locations of the screw holes of the wall mounting bracket on the mounting area.
Drill the pilot holes at the marked locations ( Figure 3-4

).
Step 2: Secure the mounting bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them ( Figure 3-4

).
Figure 3-4: Wall Mounting Bracket Installation
Step 3: Insert the four mounting screws (M4*6) came with the panel PC into the four
screw holes on the mounting bracket and tighten until the screw shank is
secured ( Figure 3-5 ).
CAUTION:
Please use the M4 screws provided in
the package for the mounting screws. If
the screw is missing, the thread depth of
the replacement screw should be not
more than 4 mm.