IEI Technology IOVU-210AR-RK39, User Manual

Page: 20 / 57

IOVU-210AR-RK39 Panel PC
Page 12
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
IOVU-210AR-RK39 may result in permanent damage to the
IOVU-210AR-RK39 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the IOVU-210AR-RK39. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the IOVU-210AR-RK39 is accessed internally, or any
other electrical component is handled, the following anti-static precautions are strictly
adhered to.

Wear an anti-static wristband : - Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : - Before handling the board touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : - When configuring the IOVU-210AR-RK39, place it on
an anti-static pad. This reduces the possibility of ESD damaging the
IOVU-210AR-RK39.

Only handle the edges of the PCB : - When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the flat panel PC, please follow the precautions listed below:

Power turned off : When installing the flat panel PC, make sure the power is
off. Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.