IEI Technology IOPS-Q67/H61, User Manual

Page: 29 / 70

IOPS-Q67/H61 Pluggable Module PC
Page 19
3.4.5 RS-232 Serial Port Connector
CN Label: Serial Port
CN Type:
RJ-45
CN Pinouts:
See
Table 3-4
The RS-232 serial port connector allows connection to a serial device.
Pin Description Pin Description
1 DCD 7 DT
2 DSR 8 RI
3 SIN 9 GND
4 RTS 10 GND
5 SOUT 11 N/C
6 CTS 12 N/C
Table 3-4: Serial Port Pinouts
Figure 3-5: RJ-45 Serial Port Connector
Follow the steps below to connect a serial device to the RJ-45 serial port connector of the
IOPS-Q67/H61.
Step 1: Locate the RJ-45 serial port
. The location of the RJ-45 serial port is shown in
Chapter 1
.
Step 2:
Connect the RJ-45 to COM port cable to the panel PC. Insert the RJ-45
connector end of cable into the RJ-45 serial port. See
Figure 3-6
.
Step 3:
Connect the serial device. Connect a serial device to the DB-9 connector end of
the cable. See
Figure 3-6
.