IEI Technology INOX-F15C-ULT3, User Manual

Page: 34 / 92

INOX-F15C-ULT3 Stainless Panel PC
Page 22
Figure 3-8: Open Ferrite Core
Step 2: Gently wrap the USB cable around the ferrite core. The USB cable should pass
through the core twice as shown below. The ferrite core must be installed as
close to the M12 connector as possible.
Figure 3-9: Wrapping Cable around the Core
Step 3: Close the ferrite core and snap the latch back together. Then, pull both ends of
the cable in opposite direction to tighten the loop.
Figure 3-10: Cable Installed with Ferrite Core