IEI Technology INOX-F15C-ULT3, User Manual

Page: 27 / 92

INOX-F15C-ULT3 Stainless Panel PC
Page 15
3.1 Anti-static Precautions
WARNING:
Failure to take ESD precautions during the maintenance of the
INOX-F15C-ULT3 may result in permanent damage to the
INOX-F15C-ULT3 and severe injury to the user.
Electrostatic discharge (ESD) can cause serious damage to electronic components,
including the INOX-F15C-ULT3. Dry climates are especially susceptible to ESD. It is
therefore critical that whenever the INOX-F15C-ULT3 is accessed internally, or any other
electrical component is handled, the following anti-static precautions are strictly adhered
to.

Wear an anti-static wristband : Wearing a simple anti-static wristband can
help to prevent ESD from damaging the board.

Self-grounding : Before handling the board, touch any grounded conducting
material. During the time the board is handled, frequently touch any
conducting materials that are connected to the ground.

Use an anti-static pad : When configuring the INOX-F15C-ULT3, place it on
an anti-static pad. This reduces the possibility of ESD damaging the
INOX-F15C-ULT3.

Only handle the edges of the PCB : When handling the PCB, hold the PCB
by the edges.
3.2 Installation Precautions
When installing the panel PC, please follow the precautions listed below:

Power turned off : When installing the panel PC, make sure the power is off.
Failing to turn off the power may cause severe injury to the body and/or
damage to the system.

Certified Engineers : Only certified engineers should install and modify
onboard functionalities.