IEI Technology IMBA-XQ354 User Manual Download Page 190

Page: 190 / 245

IMBA-XQ354 Motherboard

Page 170

Figure 7-32: Matrix Storage Manager Setup Complete

Step 13:

The confirmation screen offers the option of restarting the computer now or later.

For the settings to take effect, the computer must be restarted. Click

INISH

exit the wizard.

7.8 Intel® AMT (HECI) Driver

The Intel® AMT HECI drivers are a software interface between the operating system and

the AMT subsystem. All communications between the OS and AMT is accomplished

through the HECI interface. For more information on Intel® AMT, please visit

http://www.intel.com/technology/platform-technology/intel-amt/

. To install the Intel® AMT

HECI drivers, please follow the steps below:

Step 1:

Select "

iAMT and Utilities

" from the drivers menu.

Step 2:

Browse to the "

HECI

" folder (

Figure 7-33

Summary of Contents for IMBA-XQ354






















































































































































































































































Search results

Summary of Contents for IMBA-XQ354

Reviews:

Related manuals for IMBA-XQ354

Brands by name

Popular brands

IEI Technology IMBA-XQ354, User Manual

Search results

Summary of Contents for IMBA-XQ354

Reviews:

Related manuals for IMBA-XQ354

Brands by name

Popular brands