IEI Technology IMBA-Q670 User Manual Download Page 181

Page: 181 / 222

IMBA-Q670 ATX Motherboard

Page 163

Step 1:

Follow the steps described in

Section B.2.1 ~ Section B.2.3

to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Figure B-22: Auto Recovery Utility

Step 3:

Disable the automatically restart function before creating the factory

default image

. Go to: My Computer

Properties

Advanced. Click the

Settings button of Startup and Recovery. Deselect “Automatically restart”. Click

OK to save the settings and exit. (See Figure B-23)

Figure B-23: Disable Automatically Restart

Summary of Contents for IMBA-Q670































































































































































































































Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands

IEI Technology IMBA-Q670, User Manual

Search results

Summary of Contents for IMBA-Q670

Reviews:

Related manuals for IMBA-Q670

Brands by name

Popular brands