IEI Technology IMBA-Q470 User Manual Download Page 86

Page: 86 / 102

IMBA-Q470 ATX Motherboard

Page 86

4.3

Socket LGA1200 CPU Installation

WARNING:

CPUs are expensive and sensitive components. When installing the

CPU please be careful not to damage it in anyway. Make sure the CPU

is installed properly and ensure the correct cooling kit is properly

installed.

DO NOT touch the pins at the bottom of the CPU. When handling the

CPU, only hold it on the sides.

To install the CPU, follow the steps below.

Step 1:

Disengage the load lever

by pressing the lever down and slightly outward to

clear the retention tab. Fully open the lever. See

Figure 4-1.

Figure 4-1: Disengage The CPU Socket Load Lever

Step 2:

Open the socket and remove the protective cover.

The black protective

cover can be removed by pulling up on the tab labeled "Remove". See

Figure 4-2

Summary of Contents for IMBA-Q470







































































































Search results

Summary of Contents for IMBA-Q470

Reviews:

Related manuals for IMBA-Q470

Brands by name

Popular brands

IEI Technology IMBA-Q470, User Manual

Search results

Summary of Contents for IMBA-Q470

Reviews:

Related manuals for IMBA-Q470

Brands by name

Popular brands