IEI Technology IMBA-Q370-R20, User Manual, Page: 91 / 163

IMBA-Q370 ATX Motherboard
Page 75
4.10 Intel
®
AMT Setup Procedure
The IMBA-Q370 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1:
Make sure at least one of the memory sockets is installed with a DDR4 DIMM.
Step 2: Connect an Ethernet cable to the RJ-45 connector labeled LAN1_USB1 .
Step 3: The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
Step 4: Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD.
Step 5:
Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up
process. Enter the Intel® current ME password as it requires (the Intel® default
password is admin ). Step 0:
NOTE:
To change the password, enter a new password following the strong
password rule (containing at least one upper case letter, one lower
case letter, one digit and one special character, and be at least eight
characters).