IEI Technology IMBA-H420, User Manual

Page: 81 / 90

IMBA-H420 ATX Motherboard
Page 81
4.10 Intel
®
AMT Setup Procedure
The IMBA-H420 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1:
Make sure at least one of the memory sockets is installed with a DDR4 DIMM.
Step 2:
Connect an Ethernet cable to the RJ-45 connector labeled JP1
Step 3:
The AMI BIOS options regarding the Intel® ME or Intel® AMT must be enabled,
Step 4:
Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD.
Step 5:
Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press <Ctrl+P> after a single beep during boot-up
process. Enter the Intel® current ME password as it requires (the Intel® default
password is admin ).
Step 0: