IEI Technology IMBA-H420, User Manual

Page: 67 / 90

IMBA-H420 ATX Motherboard
Page 67
WARNING:
The installation instructions described in this manual should be carefully
followed in order to prevent damage to the components and injury to the
user.
Before and during the installation please DO the following:

Read the user manual:
o
The user manual provides a complete description of the IMBA-H420
installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD):
o
Electronic components are easily damaged by ESD. Wearing an ESD
cuff removes ESD from the body and helps prevent ESD damage.

Place the IMBA-H420 on an anti-static pad:
o
When installing or configuring the motherboard, place it on an anti-static
pad. This helps to prevent potential ESD damage.

Turn all power to the IMBA-H420 off:
o
When working with the IMBA-H420, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the
system.
Before and during the installation of the IMBA-H420, DO NOT:

Remove any of the stickers on the PCB board. These stickers are required
for warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.