IEI Technology IMBA-9454ISA, User Manual

Page: 136 / 281

IMBA-9454ISA ATX Motherboard
Page 116
Audio devices
RJ-45 Ethernet cable connectors
Parallel port devices
PS/2 devices
Serial port devices
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding IMBA-9454ISA external peripheral interface connector
making sure the pins are properly aligned.
5.8.1 Audio Connection
Audio signals are interfaced through three phone jack connections. The red phone jack is
for Mic In, blue is for Line In and green is for Speaker Out. Follow the steps below to
connect audio devices to the IMBA-9454ISA.
Step 1: Locate the audio phone jacks . The location of the audio phone jacks are
shown in Chapter 3 .
Step 2: Insert audio phone jack plugs . Insert audio phone jack plugs into the audio
phone jacks on the external peripheral interface. See Figure 5-22. Step 0:
Figure 5-22: Audio Connectors