IEI Technology IMBA-9454ISA User Manual Download Page 102

Page: 102 / 281

IMBA-9454ISA ATX Motherboard

Page 82

4.3.3 Audio Connectors

CN Label:

CN2

CN Type:

Audio jack

CN Location:

See Figure 4-24

CN Pinouts:

See Figure 4-27

Line In port (Light Blue):

Connects a CD-ROM, DVD player, or other audio

devices.

Speaker Out port (Lime):

Connects to a headphone or a speaker. With

multi-channel configurations, this port can also connect to front speakers.

Microphone (Pink):

Connects a microphone.

Figure 4-27: Audio Connector

4.3.4 LAN Connectors

CN Label:

LAN/USB1, LAN/USB2

CN Type:

RJ-45

CN Location:

Figure 4-24

CN Pinouts:

Table 4-28

The IMBA-9454ISA is equipped with two built-in RJ-45 Ethernet controllers. The

controllers can connect to the LAN through two RJ-45 LAN connectors. There are two

LEDs on the connector indicating the status of LAN. The pin assignments are listed in the

following table:

Summary of Contents for IMBA-9454ISA


























































































































































































































































































Search results

Summary of Contents for IMBA-9454ISA

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454ISA, User Manual

Search results

Summary of Contents for IMBA-9454ISA

Reviews:

Brands by name

Popular brands