IEI Technology IMBA-9454G, User Manual

Page: 92 / 205

IMBA-9454G Motherboard
Page 74
5.2.1 Installation Notices
WARNING:
The installation instructions described in this manual should be
carefully followed in order to prevent damage to the IMBA-9454G and
injury to the user.
Before and during the installation please DO the following:

Read the user manual :
o
The user manual provides a complete description of the IMBA-9454G
installation instructions and configuration options.

Wear an electrostatic discharge cuff (ESD) :
o
Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the body and helps prevent ESD damage.

Place the IMBA-9454G on an antistatic pad :
o
When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.

Turn off all power to the IMBA-9454G :
o
When working with the IMBA-9454G, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the IMBA-9454G DO NOT :

Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.

Use the product before verifying all the cables and power connectors are
properly connected.

Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the IMBA-9454G is properly installed.