IEI Technology IMBA-9454G User Manual Download Page 125

Page: 125 / 205

IMBA-9454G Motherboard

Page 107

Enhanced mode. In this mode, IDE channels and SATA

channels are separated. This mode supports up to 6

storage devices. Some legacy OS do not support this

mode.



Configure SATA as [IDE]

Use the

Configure SATA as

option to configure SATA devices as normal IDE devices.



IDE D

EFAULT

Configures SATA devices as normal IDE device.



Configure SATA Channels [Before PATA]

Use the

Configure SATA Channels

option to determine how SATA channels and PATA

channels are ordered.



Before PATA

EFAULT

Puts SATA channels before PATA channels.



Behind PATA

Puts SATA channels behind PATA channels.



IDE (Master) and IDE (Slave)

When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the

status of the auto detected IDE devices. The following IDE devices are detected and are

shown in the IDE Configuration menu:



Primary

IDE

Master



Primary

IDE

Slave



Secondary IDE Master



Secondary IDE Slave



Third IDE Master



Third IDE Slave

The IDE Configuration menu (

BIOS Menu 4

) allows changes to the configurations for the

IDE devices installed in the system. If an IDE device is detected, and one of the above

listed BIOS configuration options are selected, the IDE configuration options shown in

Section 6.3.2.1

appear.

Summary of Contents for IMBA-9454G














































































































































































































Search results

Summary of Contents for IMBA-9454G

Reviews:

Brands by name

Popular brands

IEI Technology IMBA-9454G, User Manual

Search results

Summary of Contents for IMBA-9454G

Reviews:

Brands by name

Popular brands