manualshive.com logo in svg

IEI Technology IMB-H810-i2-R11, User Manual

Share
Download
IEI Technology IMB-H810-i2-R11 User Manual Download Page 91

 

 

IMB-H810-i2 microATX Motherboard 

Page 75

5.3.2 RTC Wake Settings 

The 

RTC Wake Settings

 menu (

BIOS Menu 4

) configures RTC wake event. The RTC 

wake function is supported in ACPI (S3/S4/S5) and APM soft off modes. 

Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. 

 

Advanced 

 

 

 

 

 

 

 
Wake System with Fixed Time 

[Disabled] 

 
 

 
Enables or Disables 
system wake on alarm 
event. When enabled, 
system will wake on the 
date: hr: min: sec 
specified. 
 
 
---------------------- 
 



: Select Screen 

 

: Select Item 

Enter 

Select 

+  -   Change  Opt. 
F1 General 

Help 

F2 Previous 

Values 

F3 Optimized 

Defaults

F4 

Save & Exit 

ESC Exit 

Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc. 

BIOS Menu 4: RTC Wake Settings

 

 

Wake System with Fixed Time [Disabled] 

Use the 

Wake System with Fixed Time

 option to specify the time the system should be 

roused from a suspended state. 

 

Disabled D

EFAULT

 

The real time clock (RTC) cannot generate a wake 

event 

Summary of Contents for IMB-H810-i2-R11













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands