IEI Technology IMB-H810-ECO-R11, User Manual

Page: 77 / 172

IMB-H810-i2 microATX Motherboard
Page 61
4.3.2 Clear CMOS Button
To reset the BIOS, remove the on-board battery and press the clear CMOS button for
three seconds or more. The clear CMOS button location is shown in Figure 4-10 .
Figure 4-10: Clear CMOS Button Location
4.3.3 COM 10 Function Select
The COM 10 Function Select jumper sets the communication protocol used by the
COM 10 port as RS-232, RS-422 or RS-485. The COM 10 Function Select settings are
shown in Table 4-1 .
Setting Description
Short 1-2 RS-232 (Default)
Short 2-3 RS-422 or RS-485
Table 4-1: COM 10 Function Select Jumper Settings