IEI Technology IMB-H610 Us Er Manual Download Page 160

Page: 160 / 192

IMB-H610 Mic ro -ATX Mo th e rb o a rd

P a g e 145

B.2.5

Cre a te Fa c to ry De fa u lt Im a g e

NOTE:

Before creating the factory default image, please configure the system

to a factory default environment, including driver and application

installations.

To create a factory default image, please follow the steps below.

S te p 1:

Turn on the system. When the following screen displays (

Figure B-10

), press

the <

> key to access the recovery tool. The message will display for 10

seconds, please press F3 before the system boots into the operating system.

Figure B-10: Press F3 to Boot into Recovery Mode

S te p 2:

The recovery tool menu appears. Type <

> and press <

Enter

>. (

Figure B-11

)

Figure B-11: Recovery Tool Menu

S te p 3:

The About Symantec Ghost window appears. Click

button to continue.

Summary of Contents for IMB-H610

































































































































































































Search results

Summary of Contents for IMB-H610

Reviews:

Related manuals for IMB-H610

Brands by name

Popular brands

IEI Technology IMB-H610, Us Er Manual

Search results

Summary of Contents for IMB-H610

Reviews:

Related manuals for IMB-H610

Brands by name

Popular brands