IEI Technology IMB-9454G-R40 User Manual Download Page 84

Page: 84 / 165

Page 70

IMB-9454G-R40

Page 70

Quantity

Type

IDE flat cable

2 SATA

cables

1 SATA

power

cable

2 RS-232

cables

1 RS-422/485

cable

1 Power

cable

Table 4-1: IEI Provided Cables

4.5.4.1 IDE Disk Drive Connector (IDE1)

The cable used to connect the motherboard to the IDE device is a standard 40-pin

ATA/100 flat cable. To connect an IDE device to the motherboard, follow the instructions

below.

Step 1:

Find the IDE flat cable in the kit that came with the motherboard.

Step 2:

Connect one end of the cable to the IDE connector on the motherboard. A keyed

pin on the IDE connector prevents it from being connected incorrectly.

Step 3:

Locate the red wire on the other side of the cable that corresponds to the pin 1

connector.

Step 4:

Connect the other side of the cable to the IDE device making sure that the pin 1

cable corresponds to pin 1 on the connector.

Step 0:

Figure 4-9: Connection of IDE Connector

Summary of Contents for IMB-9454G-R40






































































































































































Search results

Summary of Contents for IMB-9454G-R40

Reviews:

IEI Technology IMB-9454G-R40, User Manual, Page: 84 / 165

Search results

Summary of Contents for IMB-9454G-R40

Reviews: