manualshive.com logo in svg

IEI Technology IMB-9452, User Manual

Share
Download
IEI Technology IMB-9452 User Manual Download Page 2

 

IMB-9452 Motherboard

 

REVISION HISTORY 

Title 

IMB-9452 Intel Core Duo/Solo Motherboard

 

Revision Number 

Description 

Date of Issue 

1.0 

Initial release 

October 2006 

 

 

 

 
 

COPYRIGHT NOTICE 

The information in this document is subject to change without prior notice in order to 

improve reliability, design and function and does not represent a commitment on the part 

of the manufacturer. 

In no event is the manufacturer liable for direct, indirect, special, incidental, or 

consequential damages arising out of the use or inability to use the product or 

documentation, even if advised of the possibility of such damages. 

This document contains proprietary information protected by copyright. All rights are 

reserved. No part of this manual may be reproduced by any mechanical, electronic, or 

other means in any form without prior written permission of the manufacturer.

 

 

TRADEMARKS 

IBM PC is a registered trademark of International Business Machines Corporation. INTEL 

is a registered trademark of INTEL Corporation. AMI is registered trademarks of American 

Megatrends Inc. Other product names mentioned herein are used for identification 

purposes only and may be trademarks and/or registered trademarks of their respective 

owners.   

 

Page 2 

 

IEI® Technology, Corp

.

 

Summary of Contents for IMB-9452





























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands