IEI Technology IDS-310AI, User Manual

Page: 72 / 109

IDS-310AI Embedded System
Page 58
4.6 Boot
Use the Boot menu ( BIOS Menu 27 ) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2020 American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Launch PXE OpROM [Disabled]
Option ROM Messages [Force BIOS]
UEFI Boot [Enabled]
Boot Option Priorities
Boot Option #1 [Windows Boot Manag…]
Boot Option #2 [P0:SATADOM-SH 3ME4]
Hard Drive BBS Priorities
Select the keyboard
NumLock state
---------------------

: Select Screen
↑ ↓
: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized Defaults
F4 Save
ESC Exit
Version 2.18.1263. Copyright (C) 2020 American Megatrends, Inc.
BIOS Menu 27: Boot

Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.

On D
EFAULT
Allows the Number Lock on the keyboard to be
enabled automatically when the computer system
boots up. This allows the immediate use of the
10-key numeric keypad located on the right side of
the keyboard. To confirm this, the Number Lock LED
light on the keyboard is lit.

Off Does not enable the keyboard Number Lock
automatically. To use the 10-keys on the keyboard,
press the Number Lock key located on the upper
left-hand corner of the 10-key pad. The Number
Lock LED on the keyboard lights up when the
Number Lock is engaged.