IEI Technology IDS-310AI, User Manual

Page: 35 / 109

IDS-310AI Embedded System
Page 21
3.7.2 HDMI Connectors
NOTE:
1. Due to chipset limitation, audio is not supported over the HDMI3 connector.
2. Fully support of triple 4K display output may vary in different system
environment setting. In some conditions, the IDS-310AI may only support two
4K outputs plus one Full HD output via the three HDMI connectors. To setup a
triple 4K display connection in Windows, make sure the following graphics
driver version is installed in the system: Intel® Graphics Driver - 64 Bit
(22.20.16.4785).
CN Label: HDMI1, HDMI2, HDMI3
CN Type:
HDMI connector
CN Pinouts: See Table 3-3 and Figure 3-14
CN Location:
See Figure 3-12
The HDMI connector can connect to an HDMI device. The HDMI connectors support up to
3840x2160 @ 30Hz.
Pin Description Pin Description
1 HDM 11 GND
2 GND 12 HDMI_CLK#
3 HDMI_DATA2#- 13 N/C
4 HDM 14 N/C
5 GND 15 HDMI_SCL
6 HDMI_DATA1#- 16 HDMI_SDA
7 HDM 17 GND
8 GND 18 +5V
9 HDMI_DATA0#- 19 HDMI_HPD
10 H
Table 3-3: HDMI Connector Pinouts