IEI Technology IDDUPS-6364120A/636260A User Manual Download Page 4

Page: 4 / 52

IDDUPS Series DC/DC Converter Module

Page 4

Packing List

NOTE:

If any of the components listed in the checklist below are missing,

please do not proceed with the installation. Contact the IEI reseller or

vendor you purchased the IDDUPS-6364120/636260 from or contact

an IEI sales representative directly. To contact an IEI sales

representative, please send an email to

0H0H0H0H

[email protected]

The items listed below should all be included in the IDDUPS-6364120/636260 package.

1 x IDDUPS-6364120/636260 DC/DC converter module

1 x RS-232 cable

1 x Utility software CD

1 x QIG (Quick Installation Guide)

Optional items:

Li-Polymer Smart Battery

Cable for AC-DC adapters

Cable for 63000-FSP120AAB-RS 120W AC-DC adapter

Cable for Terminal Block

Output power cable for SATA

Output power cable for IDE or any standard 4-pin I/O devices

20p-20p ATX cable (for IDDUPS-6364120A)

SBC main power cable (for IDDUPS-636260A)

Cable with on/off switch

Cable to SBC (5VSB & PS_ON)

Images of the above items are shown in

Chapter 3

Summary of Contents for IDDUPS-6364120A/636260A





















































Search results

Summary of Contents for IDDUPS-6364120A/636260A

Reviews:

IEI Technology IDDUPS-6364120A/636260A, User Manual, Page: 4 / 52

Search results

Summary of Contents for IDDUPS-6364120A/636260A

Reviews: